kim-1

  • 6502 kim-1 emulators retro-computing programming

    m65c02: Making the Invisible Visible

    KIM-1 front panel thumbnail KIM-1 logic analyzer thumbnail MOS BASIC terminal thumbnail

    I've been spending a lot of time with the 6502 lately, first with the Apple IIe and KIM-1, and now with an emulator of my own. The project is called m65c02. It started with a simple question: what if I could see what the processor was doing, one cycle at a time?

    Running an old machine is fun. Understanding how it runs is even better. An instruction like LDA is simple enough to describe in a sentence, but that description hides the activity on the address and data buses. I wanted to get closer to the hardware, without having to attach probes to an actual board every time I had a question.

    One inspiration is Software Masters' The Visible Computer: 6502. Back in the early 1980s, it made the processor's operation something you could watch and learn from, stepping through instructions and their microsteps. I like that idea. With m65c02, I'm taking it further into the bus cycles and the surrounding hardware. The aim is the same: make the computer less mysterious by making its workings visible. The original Visible Computer manual is worth a look.

  • 6502 kim-1 pal-1 retro-computing

    Programming the PAL-1 Using the Keypad

    A video walking the user through the process of programming the PAL-1 using the keypad. It begins with a short overview of the PAL-1, then covers prelims like where the START program resides in ROM, how to set up the IRQ and NMI vectors, how to view the Accumulator contents, how to enter a program, where it should go, and how to run it normally and single step.

    Enjoy!

  • 6502 kim-1 pal-1 retro-computing

    PAL-1 Entering a Program at the Keypad

    Note describing a minimalist example of how to input and run a program on the PAL-1.

  • 6502 kim-1 pal-1 retro-computing

    PAL-1 Entering a Program via Serial Port

    Note describing a minimalist example of how to input via serial and run a program on the PAL-1.

  • 6502 kim-1 pal-1 retro-computing

    PAL-1 Loading MOS Paper Tape to RAM

    This post describes how to get your Mac talking to your PAL-1 in order to send MOS papertape format ascii files via minicom to your PAL-1 and run them. Future installments will go into more detail, from the ground up.

  • 6502 kim-1 pal-1 retro-computing

    PAL-1 Getting Started

    This is a note on how to get and get started using a PAL-1. The PAL-1 is a replica of the KIM-1, an old-school 6502 trainer, from back in the day.

  • 6502 kim-1 pal-1 retro-computing

    PAL-1 Resources A Curated List

    This is my curated list of resources. The manuals, books, videos, and sites referenced below are ones that I found useful and interesting, and occasionally enlightening. This is not an exhaustive list.

  • 6502 kim-1 pal-1 retro-computing

    PAL-1 A KIM-1 replica

    A post about my very own working PAL-1. It's definitely up and running.

    one