6502
-
apple-iie 6502 assembly retro-computing
Bit by Bit - E4 - Looping
This is the fourth episode of Bit by Bit.
In this episode I work through the material covered in chapter 4 of Assembly Lines - Looping and Counting in detail.
Here's a link to the playlist:
https://www.youtube.com/playlist?list=PL_z8XUfqFSXHvJ5E5r80ZmMN7LRcCI0Zx
Enjoy!
-
apple-iie 6502 assembly retro-computing
Bit by Bit - Exploring Low-Level Programming on the Apple IIe
This is the first episode of my bit by bit series - where I walk though the pages of Assembly Lines: The Complete Book by Roger Wagner and edited by Chris Torrence.
In this series, I share what I learn as I work through the material. I picked the IIe as the platform for the exploration because it's... well, it's fun. As soon as the computer boots you can do basic sound and graphics and machine language coding. With an Apple DOS disk, you can do integer basic and use the mini-assembler. With the Merlin disk, you have the full toolkit for doing low-level programming. It's amazing and fun.
Here's a link to the playlist:
https://www.youtube.com/playlist?list=PL_z8XUfqFSXHvJ5E5r80ZmMN7LRcCI0Zx
Currently, four episodes are up. I plan to post pretty much as soon as I finish digesting a chapter of the book.
Enjoy!
-
6502 kim-1 pal-1 retro-computing
Programming the PAL-1 Using the Keypad
A video walking the user through the process of programming the PAL-1 using the keypad. It begins with a short overview of the PAL-1, then covers prelims like where the START program resides in ROM, how to set up the IRQ and NMI vectors, how to view the Accumulator contents, how to enter a program, where it should go, and how to run it normally and single step.
Enjoy!
-
6502 electronics
Using an el-cheapo logic analyser to detect address bus activity
This note documents my exploration of using a $9.99 logic analyzer to watch my PAL-1 go through some address bus gyrations.
-
6502 electronics math
Nyquist what?! Gobsmacked by Sampling Frequency
A note to capture what I learned the hard way about sampling frequencies.
-
6502 kim-1 pal-1 retro-computing
PAL-1 Loading MOS Paper Tape to RAM
This post describes how to get your Mac talking to your PAL-1 in order to send MOS papertape format ascii files via minicom to your PAL-1 and run them. Future installments will go into more detail, from the ground up.
-
6502 kim-1 pal-1 retro-computing
PAL-1 Entering a Program via Serial Port
Note describing a minimalist example of how to input via serial and run a program on the PAL-1.
-
6502 kim-1 pal-1 retro-computing
PAL-1 Entering a Program at the Keypad
Note describing a minimalist example of how to input and run a program on the PAL-1.
-
6502 kim-1 pal-1 retro-computing
PAL-1 Resources A Curated List
This is my curated list of resources. The manuals, books, videos, and sites referenced below are ones that I found useful and interesting, and occasionally enlightening. This is not an exhaustive list.
-
6502 kim-1 pal-1 retro-computing
PAL-1 Getting Started
This is a note on how to get and get started using a PAL-1. The PAL-1 is a replica of the KIM-1, an old-school 6502 trainer, from back in the day.